RNA Whole-Mount In situ Hybridisation Proximity Ligation Assay (rISH-PLA) (Myers and Scarlett labs): Difference between revisions

From XenWiki
Jump to navigation Jump to search
imported>Virgilio
(Created page with "Link to Roussis et al. (2016) at PLOS One [http://journals.plos.org/plosone/article?id=10.1371/journal.pone.0147967] Download pdf of Research Article: Roussis et al., PLOS On...")
 
(No difference)

Latest revision as of 08:39, 10 February 2016

Link to Roussis et al. (2016) at PLOS One [1]

Download pdf of Research Article: Roussis et al., PLOS One (2016) [2]

Download Word document of protocol [3]

rISH-PLA Full Protocol

Day 1

1) Para-formaldehyde fixed Xenopus laevis oocytes were transferred to 1.5 ml Eppendorf tubes

2) The fixed oocytes were rehydrated by washing at room temperature (RT) flat on the bench with:

1 ml of 75 % Methanol in 1xPBST for 5 min
1 ml of 50 % Methanol in 1xPBST for 5 min
1 ml of 25 % Methanol in 1xPBST for 5 min
1 ml of 1xPBST for 5 min

3) The oocytes were washed with 1 ml of 0.1 M triethanolamine for 5 min at RT.

4) The oocytes were then washed with 1 ml of 0.1 M triethanolamine with 3 ul acetic anhydride added for 5 min at RT.

5) A further 3 ul acetic anhydride were added and the oocytes incubated for a further 5 min.

6) The oocytes were then washed 2 times with 1 ml PBST for 5 min in RT and then 2 times with 1 ml of Hybridisation Buffer for 2 min at RT.

7) The hybridisation buffer was replaced with a fresh 1 ml aliquot and incubated in a heating block on its side for: 30 min at 70 deg C and then 5 hours and 30 min at 60 deg C

8) The oocytes were then incubated overnight (O/N) at 60 deg C with 200 nM of LNA probe in a fresh 1 ml aliquot of hybridisation buffer.


Day 2

1) The oocytes were washed in a heating block placed on its side with the following pre-warmed at 60 deg C solutions: 1 ml of 50% deionised formamide/5 x SSC for 10 min

1 ml of 25 % deionised formamide/2 x SSC for 10 min
1 ml of 12.5 % deionised formamide/2 x SSC for 10 min
1 ml 2 x SSC/0.1 % Tween20 for 10 min
1 ml 0.2 x SSC/0.1 % Tween20 for 30 min

2) Then the oocytes were washed at RT with gentle rocking:

3 times with 1 ml 1xPBST for 5 min
1 time with 1 ml of MAB for 10 min
1 time with 1 ml MAB/2 % Block for 5 hours

3) The oocytes were then transferred to a 250 ul PCR tube that had parafilm in the bottom of it so that it was limited to hold a volume of 100 ul in order to use minimum amount of the PLA solutions.

4) The oocytes were then blocked with 100 ul of PLA kit blocking solution.

5) The blocking solution was removed and the primary antibodies added diluted in the Antibody Diluent provided by the PLA kit (1:100) and the oocytes incubated O/N at 4 deg C with gentle rocking.


Day 3

1) The oocytes were transferred back into a 1.5 ml Eppendorf tube.

2) Excess unbound primary antibodies were removed by washing 3 times for 5 min at RT on a rocker with 1ml of 1 x Wash Buffer A (provided by the kit).

3) The oocytes were transferred again into parafilm stuffed PCR tube and then incubated with 20 ul PLA probe Minus, 20 ul PLA probe Plus and 60 ul of antibody diluent (all provided by the kit) for 2 hours and 30 min at 37 deg C with gentle rocking.

4) The oocytes were then transferred back into a 1.5 ml Eppendorf tube.

5) Excess unbound secondary antibodies were removed by washing 3 times for 5 min at RT on a rocker with 1ml of 1 x Wash Buffer A (provided by the kit).

6) The oocytes were then incubated with the ligation solution (20 ul of 5 x ligation stock, 77.5 ul of Sigma H2O (SH2O) and 2.5 ul Ligase) provided by the kit for 1 hour at 37 deg C with gentle rocking.

7) The oocytes were transferred back into a 1.5 ml Eppendorf tube.

8) Excess unbound ligation solution was removed by washing 3 times for 5 min at RT on a rocker with 1ml of 1 x Wash Buffer A.

9) The oocytes were then incubated with the amplification solution (20 ul of 5 x amplification stock, 78.7 ul of SH2O and 1.3 ul of polymerase) provided by the kit for 3 hours and 20 min at 37 deg C with gentle rocking covered with foil.

10) The oocytes were transferred back into a 1.5 ml Eppendorf tube.

11) The amplification solution was removed and the oocytes washed 2 times with 1 ml of 1 x Wash Buffer B (provided by the kit) for 10 min at RT.

12) A further 2 min wash with 0.01 x Wash Buffer B was performed prior to orientation of the oocytes on the glass slide and visualisation by confocal microscopy.


NOTE:

Vortex all PLA kit Solutions before use

During and after the amplification reaction always cover with foil